Underground Lifting Stations

Sanifos 110 Black water

Mood image of a Sanifos 110 1 GR S, lifting station, grey/black water, buried in a garden connections.

Sanifos 110 Black water

An automatic lifting station that can be used for pumping residential to industrial waste water when the sewer is at too high a level for natural gravity drainage.

Designed for drainage of a single dwelling incorporating WC, bathroom, kitchen, utility room
Powerful automatic motor with quiet operation
Easy handling for installation below ground level
Pumps up to 11m vertically or 110m horizontally

Find out more

Product details

The Sanifos 110 is an automatic lifting station for residential or industrial waste. It can take waste from a toilet, basin, bath, shower, bidet, washing machine, dishwasher and sink. It is designed to take waste from a single residential dwelling. It has a single macerator pump with float activation method and has robust cutting blades to prevent clogging. The Sanifos 110 has a powerful automatic motor with quiet operation and a 110 litre storage tank. It offers easy handling for installation below ground level. The Sanifos 110 has two inlets that can take up to 110 mm and an additional two inlets that can take up to 50mm, and it discharges through 40 or 50mm pipework An external non return valve and shut off valve are needed for this unit. The Sanifos comes with a 2 year warranty.

Designed, made and tested in our factory in France and with 60 years of expertise and innovation, the Sanifos offers you peace of mind and with the back up from our service team there’s never been a better time to install a Saniflo.

Technical specification

Sanifos 110 Black water

Materials

Shaft
Tank
Pipework
Pump housing
Seal
Foot
Motor housing
Impeller

Shaft
Shaft
Tank
Tank
Pipework
Pipework
Pump housing
Pump housing
Seal
Seal
Foot
Foot
Motor housing
Motor housing
Impeller
Impeller

Shaft
Stainless steel
Tank
PE HD
Pipework
PVC
Pump housing
PA 6 GF
Seal
NBR
Foot
PA 12 GF
Motor housing
PA 6 GF
Impeller
PA 6 GF

Electrical features

Socket included
Voltage (V)
Frequency (Hz)
Power consumption P1 (W)
Power output P2 (W)
Revolution per minute (RPM)
Maximum current (A)
IP Rating
Electrical class
Motor insulation class
Current
Number of pumps
Length (m)
Section (mm²)
Type of cable

Socket included
Socket included
Voltage (V)
Voltage (V)
Frequency (Hz)
Frequency (Hz)
Power consumption P1 (W)
Power consumption P1 (W)
Power output P2 (W)
Power output P2 (W)
Revolution per minute (RPM)
Revolution per minute (RPM)
Maximum current (A)
Maximum current (A)
IP Rating
IP Rating
Electrical class
Electrical class
Motor insulation class
Motor insulation class
Current
Current
Number of pumps
Number of pumps
Length (m)
Length (m)
Section (mm²)
Section (mm²)
Type of cable
Type of cable

Socket included
no
Voltage (V)
230
Frequency (Hz)
50-60
Power consumption P1 (W)
1500
Power output P2 (W)
1050
Revolution per minute (RPM)
2900
Maximum current (A)
6
IP Rating
IP68
Electrical class
I
Motor insulation class
F
Current
Single-phase
Number of pumps
1
Length (m)
10
Section (mm²)
1.5
Type of cable
H07 RN-F 3G

Hydraulic

Discharge diameter
Max. Head (m)
Max. flow rate (m³/h)
Number of inlets
External inlet diameter (mm)
Discharge diameter ext. (mm)
Ext. ventilation diameter (mm)
Total volume (L)
Useable volume (L)
ON Level (mm)
OFF level (mm)
Max. temperature of the pumped liquid (5 min) (° C)
Min. incoming water connection (mm)
Type of impeller
Type of activation

Discharge diameter
Discharge diameter
Max. Head (m)
Max. Head (m)
Max. flow rate (m³/h)
Max. flow rate (m³/h)
Number of inlets
Number of inlets
External inlet diameter (mm)
External inlet diameter (mm)
Discharge diameter ext. (mm)
Discharge diameter ext. (mm)
Ext. ventilation diameter (mm)
Ext. ventilation diameter (mm)
Total volume (L)
Total volume (L)
Useable volume (L)
Useable volume (L)
ON Level (mm)
ON Level (mm)
OFF level (mm)
OFF level (mm)
Max. temperature of the pumped liquid (5 min) (° C)
Max. temperature of the pumped liquid (5 min) (° C)
Min. incoming water connection (mm)
Min. incoming water connection (mm)
Type of impeller
Type of impeller
Type of activation
Type of activation

Discharge diameter
50
Max. Head (m)
14
Max. flow rate (m³/h)
15
Number of inlets
4
External inlet diameter (mm)
125, 110, 40, 100, 50
Discharge diameter ext. (mm)
50
Ext. ventilation diameter (mm)
75
Total volume (L)
110
Useable volume (L)
38
ON Level (mm)
320
OFF level (mm)
120
Max. temperature of the pumped liquid (5 min) (° C)
70°C
Min. incoming water connection (mm)
182
Type of impeller
Pro X K2 grinder
Type of activation
manual

Logistics

Gross weight (kg)

Gross weight (kg)
Gross weight (kg)

Gross weight (kg)
31

General description

EAN code
Factory code

EAN code
EAN code
Factory code
Factory code

EAN code
3308815079318
Factory code
SANIFOS110P

Products

Related products

Sanifos 110 Evacuation Kit

This external non-return valve and shut off valve kit stops the return of waste back into the pump.

Related articles

Blog

Optional accessory Sanifos 110

Pumping upwards, you may require our non return ball valve and isolation valve

Quality

Buy with confidence

Made in France
Most of our products are manufactured in France to the highest quality standards.
Performance and Reliability
Technologies and materials that ensure efficiency and longevity
Warranty Extension
Saniflo products can be registered for a warranty of up to 5 years.
Extensive support
A network of Approved Service Engineers.
Experts Since 1958
Creator of the Saniflo macerating toilet.