Floor Standing Lifting StationsSanicubic 1 GR
Visual Sanicubic 1 GR SE71.1 S, lifting station for grey/waste water to be installed in a building basement.

Sanicubic 1 GR

The Sanicubic 1 GR is a lifting station ideal for small commercial premises or larger domestic dwellings.
High performance cutting blade system
Available in single-phase or three-phase
5 versions: from 20 to 39m of lift
Find out more

Product details

The Sanicubic 1 GR is a lifting station with 1 IP68 certified motor, equipped with a high-performance cutting blade system. The Sanicubic 1 GR is available in 5 versions for 4 high level lifting performances. It has 5 entries to ensure it is possible to raise all wastewater even in the most demanding circumstances. The station comes standard with a remote control box as well as audible and visual alarms.
Technical specification

Sanicubic 1 GR

  • Version
  • Version
  • Version
  • Version
  • Sanicubic 1 GR SE71.1 S
  • Version
  • Sanicubic 1 GR SE71.1 T
  • Version
  • Sanicubic 1 GR SE71.2 T
  • Version
  • Sanicubic 1 GR SE71.3 T
  • Version
  • Sanicubic 1 GR SE71.4 T

Materials

  • Shaft
  • Tank
  • Pump housing
  • Seal
  • Motor housing
  • Impeller
  • Shaft
  • Shaft
  • Tank
  • Tank
  • Pump housing
  • Pump housing
  • Seal
  • Seal
  • Motor housing
  • Motor housing
  • Impeller
  • Impeller
  • Shaft
  • 1.4021
  • Tank
  • PE LD
  • Pump housing
  • EN-GJL-200
  • Seal
  • Carbon/Ceramic
  • Motor housing
  • EN-GJL-200
  • Impeller
  • EN-GJL-200
  • Shaft
  • 1.4021
  • Tank
  • PE LD
  • Pump housing
  • EN-GJL-200
  • Seal
  • Carbon/Ceramic
  • Motor housing
  • EN-GJL-200
  • Impeller
  • EN-GJL-200
  • Shaft
  • 1.4021
  • Tank
  • PE LD
  • Pump housing
  • EN-GJL-200
  • Seal
  • Carbon/Ceramic
  • Motor housing
  • EN-GJL-200
  • Impeller
  • EN-GJL-200
  • Shaft
  • 1.4021
  • Tank
  • PE LD
  • Pump housing
  • EN-GJL-200
  • Seal
  • Carbon/Ceramic
  • Motor housing
  • EN-GJL-200
  • Impeller
  • EN-GJL-200
  • Shaft
  • 1.4021
  • Tank
  • PE LD
  • Pump housing
  • EN-GJL-200
  • Seal
  • Carbon/Ceramic
  • Motor housing
  • EN-GJL-200
  • Impeller
  • EN-GJL-200

Electrical features

  • Number of motor(s)
  • Socket included
  • Voltage (V)
  • Frequency (Hz)
  • Power consumption P1 (W)
  • Power output P2 (W)
  • Revolution per minute (RPM)
  • Maximum current (A)
  • IP rating
  • Electrical class
  • Motor insulation class
  • Current
  • Length of cable-control box (m)
  • Number of pumps
  • Type of control box
  • Length (m)
  • Section (mm²)
  • Type of cable
  • Number of motor(s)
  • Number of motor(s)
  • Socket included
  • Socket included
  • Voltage (V)
  • Voltage (V)
  • Frequency (Hz)
  • Frequency (Hz)
  • Power consumption P1 (W)
  • Power consumption P1 (W)
  • Power output P2 (W)
  • Power output P2 (W)
  • Revolution per minute (RPM)
  • Revolution per minute (RPM)
  • Maximum current (A)
  • Maximum current (A)
  • IP rating
  • IP rating
  • Electrical class
  • Electrical class
  • Motor insulation class
  • Motor insulation class
  • Current
  • Current
  • Length of cable-control box (m)
  • Length of cable-control box (m)
  • Number of pumps
  • Number of pumps
  • Type of control box
  • Type of control box
  • Length (m)
  • Length (m)
  • Section (mm²)
  • Section (mm²)
  • Type of cable
  • Type of cable
  • Number of motor(s)
  • Single motor
  • Socket included
  • No
  • Voltage (V)
  • 230
  • Frequency (Hz)
  • 50-60
  • Power consumption P1 (W)
  • 2200
  • Power output P2 (W)
  • 1700
  • Revolution per minute (RPM)
  • 2800
  • Maximum current (A)
  • 10.5
  • IP rating
  • IP68
  • Electrical class
  • I
  • Motor insulation class
  • F
  • Current
  • Single-phase
  • Length of cable-control box (m)
  • 3,5
  • Number of pumps
  • 1
  • Type of control box
  • Case ZPS 1
  • Length (m)
  • 1,5
  • Section (mm²)
  • 1.5
  • Type of cable
  • H05 VV-F 3G
  • Number of motor(s)
  • Single motor
  • Socket included
  • No
  • Voltage (V)
  • 400
  • Frequency (Hz)
  • 50-60
  • Power consumption P1 (W)
  • 2100
  • Power output P2 (W)
  • 1700
  • Revolution per minute (RPM)
  • 2800
  • Maximum current (A)
  • 3.7
  • IP rating
  • IP68
  • Electrical class
  • I
  • Motor insulation class
  • F
  • Current
  • Three-phase
  • Length of cable-control box (m)
  • 3,5
  • Number of pumps
  • 1
  • Type of control box
  • Case ZPS 1
  • Length (m)
  • 1
  • Section (mm²)
  • 1.5
  • Type of cable
  • H05 VV-F 5G
  • Number of motor(s)
  • Single motor
  • Socket included
  • No
  • Voltage (V)
  • 400
  • Frequency (Hz)
  • 50-60
  • Power consumption P1 (W)
  • 2100
  • Power output P2 (W)
  • 1700
  • Revolution per minute (RPM)
  • 2800
  • Maximum current (A)
  • 3.7
  • IP rating
  • IP68
  • Electrical class
  • I
  • Motor insulation class
  • F
  • Current
  • Three-phase
  • Length of cable-control box (m)
  • 3,5
  • Number of pumps
  • 1
  • Type of control box
  • Case ZPS 1
  • Length (m)
  • 1
  • Section (mm²)
  • 1.5
  • Type of cable
  • H05 VV-F 5G
  • Number of motor(s)
  • Single motor
  • Socket included
  • No
  • Voltage (V)
  • 400
  • Frequency (Hz)
  • 50-60
  • Power consumption P1 (W)
  • 3900
  • Power output P2 (W)
  • 3200
  • Revolution per minute (RPM)
  • 2800
  • Maximum current (A)
  • 6.5
  • IP rating
  • IP68
  • Electrical class
  • I
  • Motor insulation class
  • F
  • Current
  • Three-phase
  • Length of cable-control box (m)
  • 3,5
  • Number of pumps
  • 1
  • Type of control box
  • Case ZPS 1
  • Length (m)
  • 1
  • Section (mm²)
  • 1.5
  • Type of cable
  • H05 VV-F 5G
  • Number of motor(s)
  • Single motor
  • Socket included
  • No
  • Voltage (V)
  • 400
  • Frequency (Hz)
  • 50-60
  • Power consumption P1 (W)
  • 3900
  • Power output P2 (W)
  • 3200
  • Revolution per minute (RPM)
  • 2800
  • Maximum current (A)
  • 6.5
  • IP rating
  • IP68
  • Electrical class
  • I
  • Motor insulation class
  • F
  • Current
  • Three-phase
  • Length of cable-control box (m)
  • 3,5
  • Number of pumps
  • 1
  • Type of control box
  • Case ZPS 1
  • Length (m)
  • 1
  • Section (mm²)
  • 1.5
  • Type of cable
  • H05 VV-F 5G

Hydraulic

  • Max. Head. (m)
  • Max. flow rate. (m³/h)
  • Number of inlets
  • Inlet diameter DN
  • Discharge diameter DN
  • Ventilation diameter DN
  • Total volume (L)
  • ON Level (mm)
  • OFF level (mm)
  • Alarm level (mm)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Type of impeller
  • Type of activation
  • Max. Head. (m)
  • Max. Head. (m)
  • Max. flow rate. (m³/h)
  • Max. flow rate. (m³/h)
  • Number of inlets
  • Number of inlets
  • Inlet diameter DN
  • Inlet diameter DN
  • Discharge diameter DN
  • Discharge diameter DN
  • Ventilation diameter DN
  • Ventilation diameter DN
  • Total volume (L)
  • Total volume (L)
  • ON Level (mm)
  • ON Level (mm)
  • OFF level (mm)
  • OFF level (mm)
  • Alarm level (mm)
  • Alarm level (mm)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Max. temperature of the pumped liquid (5 min) (° C)
  • Type of impeller
  • Type of impeller
  • Type of activation
  • Type of activation
  • Max. Head. (m)
  • 22
  • Max. flow rate. (m³/h)
  • 17
  • Number of inlets
  • 7
  • Inlet diameter DN
  • 50/100
  • Discharge diameter DN
  • 50
  • Ventilation diameter DN
  • 70
  • Total volume (L)
  • 55
  • ON Level (mm)
  • 140-250
  • OFF level (mm)
  • 30
  • Alarm level (mm)
  • 180-290
  • Max. temperature of the pumped liquid (5 min) (° C)
  • 55 °C
  • Type of impeller
  • Shredding wheel Pro X K3
  • Type of activation
  • Pneumatic
  • Max. Head. (m)
  • 22
  • Max. flow rate. (m³/h)
  • 17
  • Number of inlets
  • 7
  • Inlet diameter DN
  • 50/100
  • Discharge diameter DN
  • 50
  • Ventilation diameter DN
  • 70
  • Total volume (L)
  • 55
  • ON Level (mm)
  • 140-250
  • OFF level (mm)
  • 30
  • Alarm level (mm)
  • 180-290
  • Max. temperature of the pumped liquid (5 min) (° C)
  • 55 °C
  • Type of impeller
  • Shredding wheel Pro X K3
  • Type of activation
  • Pneumatic
  • Max. Head. (m)
  • 25
  • Max. flow rate. (m³/h)
  • 17
  • Number of inlets
  • 7
  • Inlet diameter DN
  • 50/100
  • Discharge diameter DN
  • 50
  • Ventilation diameter DN
  • 70
  • Total volume (L)
  • 55
  • ON Level (mm)
  • 140-250
  • OFF level (mm)
  • 30
  • Alarm level (mm)
  • 180-290
  • Max. temperature of the pumped liquid (5 min) (° C)
  • 55 °C
  • Type of impeller
  • Shredding wheel Pro X K3
  • Type of activation
  • Pneumatic
  • Max. Head. (m)
  • 35
  • Max. flow rate. (m³/h)
  • 17
  • Number of inlets
  • 7
  • Inlet diameter DN
  • 50/100
  • Discharge diameter DN
  • 50
  • Ventilation diameter DN
  • 70
  • Total volume (L)
  • 55
  • ON Level (mm)
  • 140-250
  • OFF level (mm)
  • 30
  • Alarm level (mm)
  • 180-290
  • Max. temperature of the pumped liquid (5 min) (° C)
  • 55 °C
  • Type of impeller
  • Shredding wheel Pro X K3
  • Type of activation
  • Pneumatic
  • Max. Head. (m)
  • 39
  • Max. flow rate. (m³/h)
  • 17
  • Number of inlets
  • 7
  • Inlet diameter DN
  • 50/100
  • Discharge diameter DN
  • 50
  • Ventilation diameter DN
  • 70
  • Total volume (L)
  • 55
  • ON Level (mm)
  • 140-250
  • OFF level (mm)
  • 30
  • Alarm level (mm)
  • 180-290
  • Max. temperature of the pumped liquid (5 min) (° C)
  • 55 °C
  • Type of impeller
  • Shredding wheel Pro X K3
  • Type of activation
  • Pneumatic

Logistics

  • Gross weight (kg)
  • Gross weight (kg)
  • Gross weight (kg)
  • Gross weight (kg)
  • 64
  • Gross weight (kg)
  • 64
  • Gross weight (kg)
  • 64
  • Gross weight (kg)
  • 68
  • Gross weight (kg)
  • 68

General description

  • EAN code
  • EAN code
  • EAN code
  • EAN code
  • 3308815079110
  • EAN code
  • 3308815079127
  • EAN code
  • 3308815079134
  • EAN code
  • 3308815079141
  • EAN code
  • 3308815079158
Products

Related products

f4f6kf7dgukzgwh72hjenaeg1mv6icyw.png

Carbon Filter for Sanicubic

For use with waste water and sewage pumping systems where a vent to the atmosphere is not possible.

Related articles

Blog

Sanicubic GR Solves Sewage Problems in Ireland - Over Ground Pumps

A powerful black water pumping solution from Saniflo is helping to provide waste discharge solutions for buildings across Ireland. The floor-mounting Sanicubic 1GR is a product from the Zehnder Pump range, now part of the Saniflo SFA Group.

Quality

Buy with confidence

  • Made in France

    Most of our products are manufactured in France to the highest quality standards.

  • Performance and Reliability

    Technologies and materials that ensure efficiency and longevity

  • Warranty Extension

    Saniflo products can be registered for a warranty of up to 5 years.

  • Extensive support

    A network of Approved Service Engineers.

  • Experts Since 1958

    Creator of the Saniflo macerating toilet.