- Menu
-
Your needs
To install a new bathroom, additional toilets, a laundry room, connect the condensate drain all without major work, SFA has the solution that meets your needs. With little work you can simply drain all the water.
-
Our products
For a boiler, an air conditioner, a shower, a toilet, a kitchen, a laundry room, a refrigerated display case, a house or even a complete building, SFA has been the specialist in lifting all water since 1958 whether you are an individual or a professional, we have the solution that meets your needs.
-
Customer service
If you have a question, want to activate your warranty or need to find an Engineer we are here to help!
-
News
-
SFA group
From the invention of the first macerator 60 years ago right up the innovation happening today, find out about The SFA group and Saniflo Ireland here.
-
Professionals
Because you have to save time and be sure to have the most suitable solution, SFA offers you single-phase or three-phase power solutions, for clear, loaded or even rainwater. Finally we can direct you to the right answer.
Submersible pumps
SFA offers a complete range of pumps for lifting stations called Sanipump. In the shredding or Vortex version, with a single-phase or three-phase motor, the range covers all the needs for lifting sewage, gray water, through waste water and rainwater. Installation of these lift pumps can be done in dedicated SFA stations or existing storage tanks or even concrete tanks.
SFA Pumpselect
Our sizing software helps you define the right sump pump for your project.
Sizing forms
You do not know which product to recommend to your customers? Fill out our form and an expert will answer you.
BIMObject
Download the 3D files of our products to integrate them into your project renderings.
Submersible pumps
Sanipump ZPG 71
Sanipump
SFA offers a complete range of pumps for lifting stations called Sanipump. In the maceration or Vortex version, with a single-phase or three-phase motor, the range covers all the needs for lifting sewage and gray water, including wastewater and rainwater. The installation of these sump pumps can be done in dedicated SFA stations or existing storage tanks or even concrete tanks.
Sanipump GR et VX sont des pompes portables compactes et légères (seulement 13 kg) pour eaux usées domestiques tels que WC, salle de bains, cuisine ou buanderie, acceptant des eaux jusqu'à 70° C (5 minutes maximum).
Sanipump GR and VX are compact and lightweight portable pumps (only 13 kg) for domestic wastewater such as WC, bathroom, kitchen or laundry room, accepting water up to 70 ° C (5 minutes maximum).
The Sanipump lifting station pump is available in two versions:
Sanipump GR is equipped with a Pro X K2 knife maceration system. It discharges water in a small diameter (DN 40), up to 14 m in height with a flow rate of up to 11 m³ / h.
Sanipump VX is equipped with a Vortex impeller, it evacuates wastewater through a 50 mm diameter drain and lifts up to 13 m in height with a flow rate of up to 27 m³ / h.
Sanipump ZPG 71 is a submersible cast iron pump for pumping gray water (drainage water and storm water in S1 mode), with a maximum lifting height of 31 m and a free passage of 40 mm.
Sanipump ZPG 71 is a pump for a lifting station, but can also be installed in a manhole or a pit.
All accessories are available for installation on the floor or on a base.
Sanipump ZPG 71 is compatible with the Sanifos 1600/2100/3100 and is available in 4 versions (1 single-phase and 3 three-phase).
Sanipump ZFS 71 is a submersible cast iron pump for pumping wastewater (collective sanitary facilities or establishments open to the public) with a high manometric head of 39 m.
This pump is compatible with the Sanifos 1600, 2100 and 3100 lifting stations.
Equipped with a high-performance grinding system and a double mechanical seal, it is available in 5 versions, single-phase and three-phase, with a lifting height of up to 39 m depending on the model.
All accessories are available for installation on the floor or on a base.
Sanipump SLD is a pump for pumping station dedicated to rainwater. It was designed for high flow rainwater (48 m3 / h). It has a two-channel impeller with a free passage of 50 mm.
Sanipump SLD is available in 3 models, single-phase or three-phase:
Sanipump SLD 700 S: single-phase pump
Sanipump SLD 700 SA: single-phase pump with float switch
Sanipump SLD 700 T: three-phase pump
SFA offers you a tailor-made offer with the choice of components according to your needs.
Available in a version without a seat base for easy installation or on guide bars with a coupling system.
Accessory kits are available to provide an answer to all your needs, whether for a single or twin-pump installation.
When 2 pumps are installed, it is recommended to install a ZPS control box and Aqua XL floats.
All these pumps are guaranteed for 2 years